Biogas Blower

Biogas Blowers

We are manufacturing and supplying Biogas Blowers which are used for handling bio digester and landfill gases. These ensure safety for these kinds of explosive and corrosive application. Our blowers are manufactured as per the industrial standards by using advanced technology and quality raw material.

The fully engineered DELTA BLOWER units have been modified specially for applications handling bio / digester / landfill gases. Certified safety for this explosive and corrosive application.

Intake Volume Flow	From 30 m³/h to 15,000 m³/h.
Pressure Operation	Up to 1000 mbar.
Medium	Landfill gas, digester gas and biogas (town gas).
General Application	Designed for the conveying and compression of landfill gas, digester gas and biogas.
Note	Explosion proof up to 12 bar. Corrosion protection. Many other components and accessories available, as well as stainless steel and high-tech coating.

Aerzener positive displacement blower units with three-lobe rotors and internal pulsation reduction - now also for biogas / landfill gas

Compression of bio- / landfill gases and other non-inert gases The specific utilization of bio – and landfill gases contributes to reduce the emissions of gases which are dangerous for the climate by generating power. In block-type thermal power stations (BHKW) current is produced in gas motor – generator aggregates. The waste heat arising during combustion is supplied via heat exchangers to a further utilization. Concerning gas exhaust and admission pressure production for block-type thermal power station and flare unit, gas compressors are used. Aerzen gas units are designed for the conveyance and compression of landfill - and biogas as well as natural - or town gas. The blowers can be operated with differential pressures up to 700 resp. 1000 mbar depending on blower size and intake pressure.

Standard - scope of supply:• Blower stage with gastight sealing of the driving shaft, (explosion-proof up to 12 bar with TÜV - certificate or strength test by a hydrostatic test with 5 bar), combined conveying chamber sealing for humid landfill gas (option), special corrosion protection-coating of the rotors and the conveying chamber (option).• Base support with integrated discharge silencer dimensioned for operating overpressure 1 bar (explosion-proof 12 bar)• Flexible machinery mountings with fixing bolts• Hinged motor mounting plate as belt tensioning device• Belt drive complete (narrow v-belts antistatic)• Belt guard (spark-safe) (in case of design with acoustic

Among others the following components are available in addition beside the described standard concept:- Bypass operation with overflow regulator for keeping the discharge pressure- Pressure protection via safety relief valve- Bypass with start-up unloading device- Purge gas station (admission of the neutral chambers with purge gas)- Shut-off devices (e.g. ball cocks)- Instrumentation and protection- Acoustic hood After arrangement special designs and modifications
regarding design and material are possible. Acc. to EC-guideline 94/9/EC (ATEX) the units can be used within the appliance group II in category 2 with corresponding equipment – therefore zone 1 internal and external (temperature class T3).

Delta Blower Generation 5 : Delta Blowers Generation 5 | Delta Screw Generation 5 |

Vacuum Pumps : High Vacuum Pumps | Vacuum Blower With Pre-Inlet Cooling | Low Vacuum Blower ( Pump ) |

Screw Compressors : Oil Free Air Compressors | Oil Free Gas Compressors | Oil Flooded Screw Compressor |

Address : Aerzen Machines (India) Pvt. Ltd. : Plot No. E-115 / 116, G.I.D.C Savli, Tal. Savli, Dist. Vadodara - 391 775, Gujarat, India.

Phone.: +91-2667-264 816 / 264 817 , Fax.: +91-2667-264 818 , E-mail.: response@aerzenindia.co.in

Home I Profile I Contact I Enquiry